To remove a Vivint Doorbell Camera from the wall, you can follow these steps:
1. Turn off the power: The first step is to turn off the power to the doorbell camera. You can do this by turning off the breaker that controls the doorbell camera's power supply.
2. Remove the cover: Locate the cover on the doorbell camera and remove it by gently prying it off with a flathead screwdriver or your fingers.
3. Unscrew the mounting bracket: Once the cover is removed, you should be able to see the mounting bracket that holds the doorbell camera in place. Use a Phillips head screwdriver to unscrew the mounting bracket from the wall.
4. Disconnect the wires: Once the mounting bracket is removed, you should be able to see the wires that connect the doorbell camera to the power supply. Carefully disconnect the wires from the doorbell camera by pulling them out of the wiring terminal.
5. Remove the doorbell camera: Once the wires are disconnected, you should be able to lift the doorbell camera off the mounting bracket and remove it from the wall.
6. Patch the holes: After removing the doorbell camera, you will likely have holes in your wall from the mounting bracket. You can patch these holes with spackle or drywall patching compound.
It's important to follow these steps carefully and to turn off the power supply to the doorbell camera before attempting to remove it from the wall. If you are unsure about any aspect of the removal process, it's best to contact a professional for assistance.